PringCam 1.0 Image

This was the image from my PringCam 1.0 - I would deem it not a failure because it did turn out an image. The subject was tiny diecast tractors made by Ertl, less than an inch long. The problem was, when I started the nearly four-hour long exposure, the wind was not blowing at all. But, by the time the exposure ended, it had picked up to a brisk breeze and the tiny weeds in the background, (which look like trees) were blurred from motion. At least I know my PringCam works. Now, to work out a few minor bugs and try it out again under the new name of PringCam 1.1.

Camera: PringCam 1.0 pinhole camera
Film: Kentmere 100 ASA 35mm black and white film
Pinhole size: .15mm
Aperture: F/1747
Exposure length: 3 hours, 48 minutes
Date: June 27th, 2012
Location: Norris City, Illinois, U.S.A.

Developing chemicals at 68 degrees:
Ilford ID-11 developer: 9 minutes
Ilford Ilfostop stopbath: 1 minute
Ilford Hypam fixer: 6 minutes
Water rinse: 1 minutes

PringCam 03c