GrahamH's photos with the keyword: work

At DownsSteams connection to Queensland Rail's we changed a points control lever from 'always set one way or held for the other way' to a 'fixed this way or fixed that way' lever. This is in the Qld Rail corridor but is part of DownsSteam's track. There is still points which have to be held where we access Qld Rail's track. See the PiPs for more details.This vintage petrol-poweredair compressor supplies a tool for drilling holes and driving screw in to sleepers. April 2024. Pips 1 & 2 The old points lever and sleepers have been removed, the ground excavated a bit more and two new sleepers added. PiP 3 Graeme is using an air-powered tool to drive a screw through a bracket which will hold the rail in place. The jack is supporting the rail at the correct height. This results in the sleeper being lifted from the ground by a few centimetres. PiP 4 The first sleeper is in position. Andrew is drilling the pilot holes for attaching the second sleeper the the track. The rodding which will connect the lever to the rails is roughly in position. PiP 5 Joe and Ian battling the air tool which didn't want to hold the bolt driver for the lever mounting screws. Eventually they won. Also note the addition of ballast which has been hand tamped under and around the new sleepers. PiP 6 Final adjustments to the lever operation to ensure point blades are at the correct gauge and the spring mechanism is equally strong in either direction setting.

A small representation of the motel props restored DiamondT prime mover. January 2017.

View of several kerb repairs.

Stump removed, concrete kerb constructed, asphalt applied and fine gravel fill eves the ground.

General view of the street.

Preparing to insert new concrete kerbing.

Cutting the road seal.

VERY NOISY!

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader has filled the hole. The roller has completed the job. Mid-street meeting to discuss tomorrows plans. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader has filled the hole. The roller is completing the job. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader is filling the hole. The men are preparing the patch for the roller to complete the job. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader is filling the hole. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader is filling the hole. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader is filling the hole. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader is filling the hole. Additional hotmix was needed. The loader is picking up from the extra pile. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck has placed a pile and the loader is filling the hole. October 2013.

Repairing damaged pavement. The faulty section has been dug out by the loader. The hotmix truck is placing a pile for the loader to fill the hole with. October 2013.