First (Incomplete) Frame

So, I went out shooting on this day, which happened to be International Film Buying Day back in 2020, and this was the first frame I shot near my house to make sure the film was loaded properly. It turned out to not be a full frame, because it had a little light leak on the edge of it.

Camera: Zenit ET (Made in Russia in 1984)
Lens: Auto Sears 50mm, f/1.7 (Made in Japan)
Film: Astrum Foto 200 B&W (expired 01/19)
Aperture: f/11
Shutter Speed: 1/250 sec.
Date: October 1st, 2020, 11.07 a.m.
Location: Norris City, Illinois, U.S.A.

Developing chemicals:
2 minute presoak
Adox Adonal 1+50 (500ml water, 2 tsp. Adox Adonal) for 15 minutes at 20°C/68.0°F
15 second initial agitation, then 5 second gentle (wine glass swirl) agitation each minute
1 minute water rinse
Ilford lfostop, 30 second agitation, 30 second stand
1 minute water rinse
Ilford Hypam Fixer, 8 minutes, 3 inversions every 30 seconds
2 minutes water rinse
3 drops Photo-Flo final rinse for 1 minute

Zenit-1 Astrum 200 ICCD2020 01df